Mifare RC522 13.56MHz RFID Reader/Writer
[0001]

MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the "table" application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. 14443A compatible transponder signals. The digital part of to handle the ISO14443A frames and error detection. In addition, support rapid CRYPTO1 encryption algorithm, terminology validation MIFARE products. MFRC522 support MIFARE series of high-speed non-contact communication, two-way data transmission rate up to 424kbit / s. As new members of the 13.56MHz reader card series of highly integrated chip family, MF RC522 MF RC500 MF RC530 There are a lot of similarities, but also have many of the characteristics and differences. Serial communications connection-less communication between hosts and can, depending on the user needs to select SPI, IIC or serial UART mode, helps to reduce the connection, narrow PCB board size and cost.

The MF522-AN module the the original Philips MFRC522 chip design circuit card reader, easy to use, low-cost, applies to the user equipment development, the reader and the development of advanced applications, the need for the the RF card terminal design / production of user. This module can be directly loaded into the various reader molds. Utilizes a voltage of 3.3V, through the SPI interface simple few lines directly with any user CPU motherboard connected communication can ensure that the module is stable and reliable work, distance card reader;

Technical parameters:
Product Model: MF522-AN
Operating current :13-26mA / DC 3.3V
Idle current :10-13mA / DC 3.3V
Sleep current: <80uA
Peak current: <30mA
Operating Frequency: 13.56MHz
Read Range: 0 to 60mm (mifare1 card)
Interface: SPI
Data transfer rate: maximum 10Mbit / s
Support Card Type: mifare1 S50, mifare1 S70 MIFARE Ultralight, mifare Pro, MIFARE DESFire
Physical characteristics: size: 40mm × 60mm
Environment
Operating temperature: -20-80 degrees Celsius
Storage Temperature: -40-85 degrees Celsius
Humidity: 5% -95% relative humidity

S50 white card
measured reading distance> = 7.5cm

User Manual